Multifunctional Acrylic Polymers with Enhanced Adhesive Property Serving as Excellent Edge Encapsulant for Stable Optoelectronic Devices.

Pendant groups in acrylic adhesive polymers (Ads) have a profound influence on adhesive and cohesive properties and additionally on encapsulant application. However, a systematic investigation to assess the impact of the pendant groups' length and bulkiness is rare, and there is not even a single report on applying Ads as interfacial adhesion promotors and encapsulation materials simultaneously. Herein, we have developed a series of multifunctional methacrylic polymers, namely, R-co-Ads, with varying pendant length and bulkiness (R = methyl (C1), ethyl (C2), propyl (C3), butyl (C4), pentyl (C5), hexyl (C6), isobutyl (iC4), and 2-ethylhexyl (2EH)). The adhesion-related experimental results reveal that R-co-Ads have high transparency, strong adhesion strength to the various contact surfaces, and a fast cure speed. In particular, C1-co-Ad shows a superior adhesion performance with an improved cross-cut index of 4B and a shear bonding strength of 1.56 MPa. We also have adopted C1-co-Ad for encapsulation of various emerging optoelectronic applications (e.g., perovskite solar cell-, charge transport-, and conductivity-related characteristics), demonstrating its excellent edge encapsulant served to improve the device stability against ambient air conditions. Our study establishes the structure-adhesion-surface relationships, advancing the better design of adhesives and encapsulants for various research fields.

A Study on Wheel Member Condition Recognition Using 1D-CNN.

The condition of a railway vehicle's wheels is an essential factor for safe operation. However, the current inspection of railway vehicle wheels is limited to periodic major and minor maintenance, where physical anomalies such as vibrations and noise are visually checked by maintenance personnel and addressed after detection. As a result, there is a need for predictive technology concerning wheel conditions to prevent railway vehicle damage and potential accidents due to wheel defects. Insufficient predictive technology for railway vehicle's wheel conditions forms the background for this study. In this research, a real-time tire wear classification system for light-rail rubber tires was proposed to reduce operational costs, enhance safety, and prevent service delays. To perform real-time condition classification of rubber tires, operational data from railway vehicles, including temperature, pressure, and acceleration, were collected. These data were processed and analyzed to generate training data. A 1D-CNN model was employed to classify tire conditions, and it demonstrated exceptionally high performance with a 99.4% accuracy rate.

Octafluoronaphthalene as a thermal-annealing-free volatile solid additive enables high-performance organic solar cells.

A thermal annealing-free solid additive octafluoronaphthalene was developed for high-performance organic solar cells. In an additive-modified device, an impressive power conversion efficiency of 18.59% from 17.27% was achieved with simultaneously enhanced current density from 26.86 to 27.53 mA cm-2 and fill factor from 74.34% to 78.85%.

Conformational Locking Control of 2D Outer Side Chains via Fluorine Atom Positioning for Improving the Thermal Stability of Organic Solar Cells.

Alongside high power conversion efficiencies (PCEs), device stability, especially thermal issues, is another key factor for the successful commercialization of nonfullerene acceptor (NFA)-based organic solar cells (OSCs). Considering the significant effects of the side-chain engineering of NFAs on molecular packing and/or locking strongly associated with the thermal stability of OSCs, herein, we present two new isomeric NFAs with 4-fluoro- and 2-fluoro-substituted hexylphenyl two-dimensional (2D) outer side chains (4FY and 2FY, respectively). In contrast with the 2FY having a horizontal stretching conformation, 4FY exhibits a diagonal stretching conformation of the 2D outer side chains and a higher dipole moment, resulting in a huge difference in their crystalline/aggregation characteristics, i.e., 4FY possesses a higher crystallinity with a denser molecular packing than the 2FY neat film, as evidenced by thermal and morphological characterizations. Encouragingly, relative to the one based on 2FY, the OSC based on 4FY delivers a PCE as high as 16.4%, together with excellent thermal stability (88.4% PCE retention under 85 °C for 360 h), which is attributed to a more optimal and robust blend morphology induced by its better compatibility into the used donor component and stronger crystallinity. This work demonstrates that in addition to the improved photovoltaic property, the appropriate F-positioning on the 2D outer side chains can play a key role in controlling their conformations, which can promote the increase of the thermal stability of OSCs.

Naphthalene diimide-based random terpolymers with axisymmetric and asymmetric electron acceptors for controllable morphology and enhanced fill factors in all-polymer solar cells.

All-polymer solar cells (all-PSCs), based on p-type polymer donors and n-type acceptors as the active layer, offer exceptional promise because of excellent thermal stability, superior film formation, and good mechanical stress as a unique bulk heterojunction (BHJ) solar cell combination. Therefore, tuning the molecular composition between polymers is crucial for optimizing power conversion efficiency (PCE) in these all-PSC systems. In this study, we synthesized a series of naphthalene diimide (NDI)-based random terpolymers P(NDI-BDD10), P(NDI-TPD10), P(NDI-TT10), and P(NDI-2FQ10) with axisymmetric (BDD, TPD) and asymmetric (TT, 2FQ) electron acceptors. Compared with the blend morphology of PBDB-T:N2200, their diverse effects due to the addition of trace amounts of axisymmetric and asymmetric components were comprehensively investigated using physical and surface analyses and structural simulations. Consequently, most of our polymer acceptors demonstrated improved fill factors (FFs) in the optimal morphology. P(NDI-BDD10)-based devices achieved the highest PCE of 6.80% and FF of 69.1%, while the architecturally most asymmetric P(NDI-TT10)-based devices reached the lowest PCE of 4.52% despite an enhanced FF of 65.4%. As a result, the appropriate molecular arrangement is crucial for obtaining the desired morphology and improved PCE. Our findings give novel molecular design insight into the distinctions between axisymmetric and asymmetric electron acceptors and seem significant for achieving improved morphological features and efficiency.

Combining dithieno[3,2-f:2',3'-h]quinoxaline-based terpolymer and ternary strategies enabling high-efficiency organic solar cells.

By incorporating a dithieno[3,2-f:2',3'-h]quinoxaline unit into a PM6 polymer backbone, we developed a novel terpolymer family, demonstrating composition-dependent optical, electrochemical, and morphological characteristics. Organic solar cells based on the combination of a terpolymer and ternary strategy achieved a high power conversion efficiency of 17.60%, demonstrating the validity of our combination strategy.

Large Transconductance of Electrochemical Transistors Based on Fluorinated Donor-Acceptor Conjugated Polymers.

Organic electrochemical transistors (OECTs) have enormous potential for use in biosignal amplifiers, analyte sensors, and neuromorphic electronics owing to their exceptionally large transconductance. However, it is challenging to simultaneously achieve high charge carrier mobility and volumetric capacitance, the two most important figures of merit in OECTs. Herein, a method of achieving high-performance OECT with donor-acceptor conjugated copolymers by introducing fluorine units is proposed. A series of cyclopentadithiophene-benzothiadiazole (CDT-BT) copolymers for use in high-performance OECTs with enhanced charge carrier mobility (from 0.65 to 1.73 cm2·V-1·s-1) and extended volumetric capacitance (from 44.8 to 57.6 F·cm-3) by fluorine substitution is achieved. The increase in the volumetric capacitance of the fluorinated polymers is attributed to either an increase in the volume at which ions can enter the film or a decrease in the effective distance between the ions and polymer backbones. The fluorine substitution increases the backbone planarity of the CDT-BT copolymers, enabling more efficient charge carrier transport. The fluorination strategy of this work suggests the more versatile use of conjugated polymers for high-performance OECTs.

γ-Ester-Functionalized 1,1-Dicyanomethylene-3-indanone End-Capped Nonfullerene Acceptors for High-Performance, Annealing-Free Organic Solar Cells.

Modifying the end-capping groups in nonfullerene acceptors (NFAs) is an effective strategy for modulating their properties and that of the entire NFAs. This study reports the synthesis of a novel γ-ester-functionalized IC end-capping group (IC-γe) and its incorporation into the benzothiadiazole-fused central core, yielding isomer-free IC-γe end-capped NFAs, such as Y-IC-γe, Y-FIC-γe, and Y-ClIC-γe. The resultant NFAs exhibited similar absorption profiles but upshifted the lowest unoccupied molecular orbital energy level compared with those of the ester-free analogues, such as Y6 and Y7. Without thermal annealing, an excellent power conversion efficiency (PCE) of 16.4% is realized in the annealing-free OSC based on Y-FIC-γe with the PM6 donor polymer, which outperforms the OSCs based on Y-IC-γe and Y-ClIC-γe. In addition, the OSCs based on asymmetric Y-FIC-γe and Y-ClIC-γe have higher thermal stability with more than 83% PCE retention at an elevated temperature after 456 h than the symmetric Y-IC-γe case. In this study, we not only establish the structure-property relationship regarding the ester functionality and symmetricity tuning on the NFAs but also diagnose the reasons for the best-performing Y-FIC-γe-based OSCs, providing useful information for a novel high-performing NFA design strategy.

Anthropometric analysis of maxillary anterior buccal bone of Korean adults using cone-beam CT.

PURPOSE: The aim of this study was to evaluate the thickness of buccal and palatal alveolar bone and buccal bony curvature below root apex in maxillary anterior teeth of Korean adults using Cone-beam CT images. MATERIALS AND METHODS: The 3D image was reconstructed with dicom file obtained through CBCT from 20 - 39 year old Korean subjects (n = 20). The thickness of buccal and palatal plate, root diameter, the buccal bony curvature angle below root apex and the distance from root apex to the deepest point of buccal bony curvature were measured on maxillary anterior teeth area using OnDemand3D program. RESULTS: Mean thickness of buccal plate 3 mm below CEJ was 0.68 ± 0.29 mm at central incisor, 0.76 ± 0.59 mm at lateral incisor, and 1.07 ± 0.80 mm at canine. Mean thickness of palatal plate 3 mm below CEJ was 1.53 ± 0.55 mm of central incisor, 1.18 ± 0.66 mm of lateral incisor, 1.42 ± 0.77 mm of canine. Bucco-lingual diameter 3 mm below CEJ was 5.13 ± 0.37 mm of central incisor, 4.58 ± 0.46 mm of lateral incisor, and 5.93 ± 0.47 mm of canine. Buccal bony curvature angle below root apex was 134.7 ± 17.5° at central incisor, 151.0 ± 13.9° at lateral incisor, 153.0 ± 9.5° at canine. Distance between root apex and the deepest point of buccal bony curvature of central incisor was 3.67 ± 1.28 mm at central incisor, 3.90 ± 1.51 mm at lateral incisor, and 5.13 ± 1.70 mm at canine. CONCLUSION: Within the limitation of this study in Korean adults, the thickness of maxillary anterior buccal plate was very thin within 1mm and the thickness of palatal plate was thick, relatively. The buccal bony curvature below root apex of maxillary central incisor was higher than that of lateral incisor and canine and it seems that the buccal bony plate below root apex of central incisor is most curved.